Warehouse Cleaning & Sweeping Services in Sydney
We provide warehouse sweeping and industrial floor scrubbing services across Sydney and surrounding regions including Sydney CBD, Western Sydney, South Sydney, North Shore, Inner West and the Central Coast. Our ISO-certified crews sweep and scrub warehouses, distribution centres, factories, logistics hubs, cold stores and manufacturing plants.
25+ Years Of Experience
Trusted By Major Sydney Warehouses
SafeWork NSW Compliant Methods
About CG
ISO-Certified Warehouse Sweeping and Industrial Floor Scrubbing in Sydney
Warehouse Sweeping Sydney is Sydney's ISO-certified warehouse sweeping and floor scrubbing specialist, servicing warehouses, distribution centres, factories, logistics hubs, cold storage facilities and manufacturing plants across Sydney CBD, Western Sydney, Inner West, North Shore and South Sydney. Part of the CG network, Warehouse Sweeping Sydney combines 25 years of industrial cleaning experience with dust-suppression protocols that control respirable crystalline silica (RCS) and PM10 particulates below SafeWork NSW Workplace Exposure Standards. Our triple ISO certification (ISO 9001, ISO 45001, ISO 14001) means every warehouse sweep follows documented procedures with quality checks. Operators are police-verified, ISSA-trained, and covered by public liability insurance, with a dedicated account manager for every facility.

What Warehouse Sweeping Services Does Warehouse Sweeping Sydney Provide?
Every warehouse sweeping program is tailored after an on-site inspection that assesses floor type, facility size, dust load, forklift traffic patterns and compliance requirements. Available as scheduled programs or one-off deep cleans.
Ride-On Warehouse Sweeping
Industrial ride-on sweepers with integrated dust suppression remove concrete dust, packaging debris, shrink-wrap offcuts and loose particulates from warehouse floors up to 50,000 m² per shift. DustGuard misting at side brooms controls airborne PM10 at the source, keeping respirable dust below the SafeWork NSW Workplace Exposure Standard of 0.05 mg/m³ for crystalline silica.
Industrial Floor Scrubbing
Ride-on auto-scrubbers fitted with polyester or nylon brush heads remove embedded forklift tyre marks, oil films, grease deposits and ground-in grime from sealed concrete, polished concrete and epoxy-coated floors. Alkaline degreaser is applied on the forward pass and recovered on the rear squeegee — leaving floors dry and slip-safe within minutes.
Loading Dock and Hardstand Cleaning
Loading docks, receiving bays, marshalling yards and external hardstand areas cleaned with high-pressure washers rated to 3,000 PSI. Oil spills and hydraulic fluid leaks treated with absorbent granules and alkaline wash to prevent stormwater contamination under EPA NSW environmental protection requirements.
Forklift Tyre Mark Removal
Polyurethane and rubber forklift tyre deposits chemically treated with a non-corrosive alkaline degreaser before mechanical scrubbing. Restores floor appearance and maintains visibility of safety line markings compliant with AS 1319 (safety signs and colours).
High-Level Dusting and Racking Clean
Racking uprights, cross-beams, mezzanine floors, ceiling fans, light fittings and ventilation grilles cleaned using elevated work platforms and HEPA-filtered industrial vacuums. Removes accumulated dust that compromises stock integrity and air quality in enclosed warehouse environments.
Line Marking Restoration
Faded or damaged safety floor markings — pedestrian walkways, forklift exclusion zones, loading bay boundaries and emergency exit paths — restored to full visibility compliant with AS 1319 and AS 4024.1 (safeguarding of machinery). Available as an add-on with any sweeping program.
Why Do Sydney Warehouses Choose Warehouse Sweeping Sydney?
Triple ISO Certified Company
Certified to ISO 9001, ISO 45001 and ISO 14001 — every warehouse sweep follows documented quality, safety and environmental procedures verified by JAS-ANZ-accredited auditors.
25+ Years Experience
Over two decades sweeping and scrubbing warehouses across Sydney, with proven systems refined through thousands of industrial floor cleaning contracts.
5-Star Online Rating
Consistently rated 5 stars by Sydney warehouse operators for reliable service, professional crews and responsive communication.
GECA-Certified Eco-Friendly Products
GECA-certified under ISO 14024 — biodegradable degreasers from Diversey Australia and Ecolab Australia. EPA NSW compliant stormwater protection on all external wash-downs.
No Lock-In Contracts
Month-to-month service with no cancellation fees. Cm3 prequalification and Avetta compliance profiles available to facility managers on request.
Flexible Scheduling
Day shift, night shift, weekend or shutdown-window sweeping scheduled around your dispatch cycles and forklift operations. Adjust frequency anytime through your account manager.How Do I Book a Warehouse Sweeping Service in Sydney?
-
01
Request A Quote
Call our Sydney team on 02 5604 6080 or use the quote form. Let us know your warehouse size, floor type, dust load, forklift traffic volume and preferred sweeping times.
-
02
On-Site Inspection and Custom Plan
Our Sydney account manager visits your warehouse to assess floor condition, racking layout, high-traffic zones, loading dock configuration and WHS compliance requirements. We prepare a detailed sweeping plan with a transparent, fixed-price quote.
-
03
Confirm and Schedule
Choose daily, weekly, fortnightly or monthly sweeping. We assign a dedicated crew to your warehouse so you see the same operators each visit. No lock-in contracts — adjust anytime.

WarehouseSweepingSydney
Get a Free QuoteWarehouse Sweeping Sydney provides flexible, ISO-certified warehouse sweeping across all Sydney suburbs. Call 02 5604 6080.

What Areas in Sydney Does Warehouse Sweeping Sydney Service?
Warehouse Sweeping Sydney services warehouses and industrial facilities across the entire Sydney metropolitan area. Our crews and ride-on equipment are based locally — faster mobilisation and genuine understanding of your area’s logistics landscape.
What Is Included in Every Warehouse Sweeping Visit?
Full-Floor Ride-On Sweeping:
All warehouse aisles, staging areas, packing zones and open floor space swept with ride-on industrial sweepers fitted with dust-suppression misting.Edge and Corner Detailing:
Wall edges, racking bases, column footings and corners manually swept and vacuumed where ride-on machines cannot reach.Floor Scrubbing:
Ride-on auto-scrubber pass on sealed concrete, polished concrete or epoxy-coated floors to remove tyre marks, oil films and embedded grime.Loading Dock Sweep and Wash:
Receiving bays, dock levellers and marshalling areas swept and pressure-washed to remove debris, spills and external contaminants.Spill and Stain Treatment:
Oil, hydraulic fluid and chemical spills treated with absorbent granules and alkaline degreaser. Stain residue scrubbed to restore floor surface.Bin Emptying and Waste Removal:
Skip bins, waste stations and recycling bays emptied. Shrink-wrap, cardboard and pallet offcuts cleared from floor areas.Amenities Cleaning:
Bathrooms, kitchens, breakrooms and office areas within the warehouse sanitised with TGA-registered disinfectant. Supplies restocked.Post-Sweep Inspection Report:
Digital cleaning report with photo evidence, timestamps and checklist sign-off provided after every visit for compliance and audit records.
Frequently
Asked Questions

Warehouse Sweeping Sydney provides ride-on sweeping, industrial floor scrubbing, loading dock cleaning, forklift tyre mark removal, high-level dusting, racking cleaning, line marking restoration and amenities cleaning across all warehouse types in Sydney. We also offer one-off deep cleans, shutdown cleans and emergency spill response.
High-traffic warehouses processing 50+ truck movements per day should be swept daily. Medium-traffic distribution centres typically operate well on a weekly or fortnightly schedule. Food-grade warehouses requiring HACCP compliance may need daily sweeping with periodic deep scrubs. We assess these factors during our free on-site inspection.
We sweep and scrub sealed concrete, polished concrete, power-floated concrete, epoxy-coated floors and bare uncoated concrete. Brush heads, pad types and cleaning solutions are matched to each floor finish to prevent surface damage. Epoxy floors receive pH-neutral solutions that protect the coating integrity.
Our ride-on sweepers use integrated DustGuard misting systems that apply a fine water mist at side brooms, suppressing airborne PM10 and respirable crystalline silica at the source. HEPA-filtered vacuum systems capture fine particulates rated to ASHRAE Standard 52.2 MERV 13. This keeps dust below the SafeWork NSW Workplace Exposure Standard of 0.05 mg/m³ for RCS.
We use GECA-certified cleaning products from Diversey Australia and Ecolab Australia. Alkaline degreasers remove oil and tyre marks. pH-neutral solutions protect epoxy and polished concrete finishes. All products are biodegradable and safe for use around stock. TGA-registered disinfectants are used in amenities and food-grade areas.
Yes. Every team member holds a current National Police Check, is directly employed under the Cleaning Services Award 2020, and carries icare NSW workers compensation coverage. We maintain $20 million public liability insurance. Our Cm3 prequalification profile allows facility managers to verify our compliance records in real time.
Yes. Our operators hold current forklift awareness inductions and follow site-specific traffic management plans. We coordinate with your warehouse supervisor to sweep zones sequentially around dispatch cycles, minimising downtime. Safe Work Method Statements (SWMS) and risk assessments are completed before every engagement.
Yes. Food-grade warehouses requiring HACCP compliance are serviced using food-safe, GECA-certified products with no fragrance or residue. Cold storage dry areas are swept using equipment rated for low-temperature operation. We provide cleaning logs that satisfy food safety audit documentation requirements.
Yes. We restore pedestrian walkways, forklift exclusion zones, loading bay boundaries and emergency exit paths to full visibility compliant with AS 1319 (safety signs and colours) and AS 4024.1 (safeguarding of machinery). Line marking is available as an add-on with any sweeping program.
Call 02 5604 6080 or submit an enquiry through our website. We arrange a free on-site inspection, assess your warehouse floor type, size, dust load and compliance requirements, and provide a transparent, fixed-price quote with no hidden fees or lock-in contracts.

-
Service Area:
Sydney Metropolitan and Central Coast
-
Phone:
02 5604 6080
-
Services:
Warehouse Sweeping, Floor Scrubbing, Loading Dock Cleaning, Line Marking
- Email:
Contact Us
Do you wish your cleaners were more forthcoming and had a positive
